Printing and Deleting Stored Jobs
381
Job Status
11
1 Press the <Log In/Out> button on the control panel, or select the login information field
on the touch screen.
2 Enter the user ID, and select [Enter].
Note • When a passcode is set, enter the user ID
and select [Next]. Then, enter the
passcode and select [Enter].
• While the user is authenticated, the <Log
In/Out> button is lit on the control panel.
• To exit Authentication mode, press the
<Log In/Out> button on the control panel.
3 Select [Private Charge Print].
Note • If you are authenticated as a system administrator, selecting [Private Charge Print] will
display a list of authentication user IDs. Select a user ID from the list, and then select [Job
List] to display a list of jobs stored for the selected user.
4 Select the job to be printed or deleted.
Note • You can select up to 100 files
simultaneously to print or delete the files.
If you select multiple files, they are printed
in the selected order.
5 Select any option.
6 When printing, specify the number of print sets using the numeric keypad.
îš„Select All
Selects all jobs. To deselect all the jobs, select this button again.
îš„Delete
Deletes the Private Charge Print job.
Note • If jobs with the same user ID are all deleted, the user ID will be deleted.
Refer to "When [Delete] is Selected" (P.381).
îš„Print Quantity
Specify the number of print sets using the numeric keypad.
îš„Print
Prints the Private Charge Print job. The job is deleted after it is printed.
Refer to "When [Print] is Selected" (P.382).
When [Delete] is Selected
1 Select [Delete].
To Next Page
Loading...
Need help?
General
