Machine Components
49
Product Overview
2
Note • The Finisher-B1 is optional. In this guide, the Finisher-A1, Finisher-B1, and Finisher-C1 are
referred to as the "finisher".
• The power cord connected to the Finisher-B1 is a connecting cord dedicated to the machine.
Do not connect this cord to a device other than the machine.
13 Center tray (Top cover of the
finisher transport)
Copies and prints are delivered here when they cannot be delivered to
the finisher tray.
Pull the cover upward when clearing paper jams.
Note • Remove outputs delivered to the center tray constantly.
No. Component Function
To Next Page
Loading...
