6 Problem Solving
84
Problem Solving
6
Paper jams at lever 1d
1 Make sure that the machine has
stopped, and then open the left
cover on the light finisher.
2 Move lever [1d] upwards and
remove the jammed paper.
Note • If paper is torn, check for any
torn pieces of paper inside the
machine.
3 Return lever [1d] to the original
position.
4 Close the Finisher left cover.
Note • A message will be displayed and the machine will not operate if the Staple Finisher's left
cover is even slightly open.
Paper jams at lever 1b
1 Make sure that the machine has
stopped, and then open the left
cover on the light finisher.
2 Move lever [1b] rightwards and
remove the jammed paper.
Note • If paper is torn, check for any
torn pieces of paper inside the
machine.