Common Service Settings
121
Tools
5
îš„A/B Series Size
You can select a paper size from A and B series sizes.
îš„Inch Size
You can select a paper size from inch series sizes.
îš„Others
You can select a paper size from other sizes.
îš„Custom Size
You can enter any size. Set the X width between 98 and 432 mm, and the Y length between
89 and 297 mm in 1 mm increments.
Note • For open flap envelopes, enter the size with the flap size included.
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
îš„Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Select], and [Enable for Same
Paper Type/Color].
When [Enable during Auto Select] is selected, the machine switches the tray when [Auto
Select] is selected in the [Copy] screen or [Paper Select] of the print driver.
Note • The machine does not switch the tray automatically in the following cases:
- Tray 5 is selected.
- The tray containing paper other than plain paper, heavyweight paper, recycled paper,
plain reload paper, and custom paper 1 to 5 is selected.
- The tray set as [Auto Paper Off] is selected in [Paper Type Priority].
îš„Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according to
the settings in [Paper Type Priority]. When selecting [Selected Paper Type Only], you can
specify the paper type.
îš„Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Image Quality
You can set the image quality settings.
Image Quality
You can select the image quality processing method when the machine scans a document.
îš„Photo & Text Recognition
Allows you to change a level with which the machine determines a document as text or
photos. This setting is used when you select [Photo & Text] for [Original Type] on the [Image
Quality] screen.
Selecting [More Text] enables the machine to easily recognize very fine print as text.
Selecting [More Photo] enables the machine to easily recognize halftone images from
newspapers and advertisements as photos.
îš„Background Suppression (Black Copy)
Set the method of background suppression to be used when making monochrome copies.
Background suppression is the function to detect the density of colors and suppress the scan
of background colors when a document has background colors on colored paper.
Select [High Speed] to sample a section of the document and detect the background color.
Select [High Quality] to conduct a pre-scan, and sample the whole document to detect the
background color.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
