Configuration of Scan to Home
283
Scanner Environment Settings
9
Configuration of Scan to Home
This section describes how to configure the machine to use the Scan to Home service.
The following shows the reference section for each procedure.
Step 1 Preparations................................................................................................................... 283
Step 2 Enabling SMB Port and Setting up TCP/IP .................................................................. 283
Step 3 Configuring Remote Authentication............................................................................. 284
Step 4 Configuring Scan to Home............................................................................................ 285
Step 5 Configuration on the Computer .................................................................................... 286
Step 1 Preparations
The Scan to Home service allows you to forward scanned files to recipients which vary
depending on a login user when [Login to Remote Accounts] is selected for [Login
Type].
The following items are required to use the Scan to Home feature.
îš„Remote Authentication System
To use the Scan to Home service, a remote authentication system is required.
For more information about a remote authentication system, refer to "Authentication System" (P.160).
îš„Destination Computer
The following operation system must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.
z
Microsoft Windows 2000
z
Microsoft Windows Server 2003
z
Microsoft Windows Server 2008
z
Microsoft Windows Server 2008 R2
z
Microsoft Windows XP
z
Microsoft Windows Vista
z
Microsoft Windows 7
z
Mac OS X 10.2.x/10.3.x/10.4.x/10.5/10.6
Step 2 Enabling SMB Port and Setting up TCP/IP
To use Scan to Home service, enable the SMB port and set the IP address. The
following describes the configuration procedures on the machine.
Note • You can configure the settings using CentreWare Internet Services. For information on how
to use CentreWare Internet Services, refer to "Configuring Machine Settings Using
CentreWare Internet Services" (P.243).
1 Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
