3 Maintenance
66
Maintenance
3
2 Pull up the lever to open the inner cover.
3 Stick the supplied pin into the old stamp
cartridge, and pull it straight out of the
machine.
Note • If only the sponge part of the stamp
cartridge is removed, make sure of
removing the bottom part of the cartridge.
4 Insert the new stamp cartridge.
5 Close the inner cover of the document
feeder.
6 Close the left cover of the document feeder until it clicks into place, and confirm that
there is no space between the near or far side of the cover and the document feeder.
Replacing Fusing Unit
When the fusing unit is near or reaches the end of its life, the following messages are
displayed on the touch screen. Follow the messages.
Message
Remaining Page Yield
Solution
Consumables need to be
ordered.
Press Machine Status
button and select the
Supplies tab for details.
Approx. 3,500 pages Order the fusing unit.
Consumables need to be
replaced.
Press Machine Status
button and select the
Supplies tab for details.
-
Replace the fusing unit with a
new one.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
