Changing the Paper Size
49
Paper and Other Media
2
Changing the Paper Size for Tray 6 (HCF A4 1)
The following describes how to change paper size in Tray 6 (HCF A4 1).
1 Pull out Tray 4 until it stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
the job.
• To prevent paper jams or erroneous
detection of loaded paper in a tray by the
machine, do not add paper on top of any
remaining paper in the tray.
2 Remove any paper loaded in the tray.
3 Open the end guide (c) and unscrew the
screw (
d). And then remove the guide from
the tray.
4 Insert the small protrusions at the bottom of the guide into the holes corresponding to
the paper size (
c). Insert the protrusion on the tray into a hole corresponding to the
paper size on the top of the guide, and tighten up the screw (
d).
Make sure to pull out the tray
slowly. When the tray is being
pulled out with force, the tray may
possibly hit your knees or other
parts of your body causing
injuries.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
