1 Before Using the Machine
20
Before Using the Machine
1
4 Press the main power switch to the [ ] position to switch off the main power.
5 Connect the Ethernet cable to the Ethernet
interface connector.
Note • Always use the correct Ethernet cable
with your network connection. When you
replace the cable, contact our Customer
Support Center.
• This connector will be disabled while
10BASE-T/100BASE-TX/1000Base-T
connector being activeted. For using
10BASE-T/100BASE-TX/1000Base-T
connector, Gigabit Ethernet Kit (optional)
is required.
6 Press the main power switch to the [ | ] position to switch on the main power.
7 Close the front cover.
8 Press the power switch to the [ | ] position to switch on the power.
For more information on setting items, refer to "Printer Environment Settings" (P.247).
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
