Specifications
511
Appendix
16
Output Paper Weight Paper Tray 1: 60 - 105 gsm
Paper Tray 2 to 4: 60 - 215 gsm
Paper Tray 5: 60 - 215 gsm
Paper Tray 6 (HCF A4 1): 60 - 215 gsm
Important • Use paper recommended by Fuji Xerox. Copying may not
be performed correctly depending on the conditions.
First Copy Output Time 4.0 Second 4.2 Second 4.2 Second
Important • The values may vary depending on the machine
configuration.
Reduction/Enlargement Size-for-Size 1:1±0.7%
Preset % 1:0.500, 1:0.707, 1:0.816, 1:0.866, 1:1.154, 1:1.225,
1:1.414, 1:2.000
Variable % 1:0.25 - 1:4.00 (1% increments)
Continuous Copy Speed Paper Tray1 - 4
A4
35 sheets/minute* 30 sheets/minute 25 sheets/minute
A4
22 sheets/minute 22 sheets/minute 20 sheets/minute
B4
20 sheets/minute 19 sheets/minute 16 sheets/minute
B5
33 sheets/minute 30 sheets/minute 25 sheets/minute
A3
17 sheets/minute 16 sheets/minute 14 sheets/minute
*: DocuCentre-IV 3065 copies 34 sheets/minute when feeding paper
from Tray1.
Important • When paper is fed from Tray 5 and the paper size is set to
[Auto Detect], the printing speed for the first page will be
slower.
• The speed may be reduced due to image quality
adjustment.
• The performance may be reduced depending on the paper
type or paper tray.
• When paper in width narrower than B5, such as postcards,
is output continuously, the temperature on the fusing unit
becomes high. As a result, the machine may suspend the
output, displaying a message "Please wait", and may
resume in 1 minute. Also, for paper A5 or smaller, even after
1 sheet of paper is output, the machine may suspend with a
"Please wait" message and may resume in 30 seconds.
DocuCentre-IV 3065 DocuCentre-IV 3060 DocuCentre-IV 2060
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
