Fuji Xerox DocuCentre-IV 3060

16 Appendix
520
Appendix
16
*1 Based on when larger size paper is stacked on paper.
*2 For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job
with center binding/folding specified was output, remove the output paper from the tray to output the
next job. In addition, when you print a job with center binding/folding specified and smaller-sized
paper remains on the output tray, remove the paper from the tray first.
*3 For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-
B1 is required.
Side Tray (Optional)
Two Tray Module (Optional)
Tandem Tray Module (Optional)
Machine Footprint
(when the unit is
connected to
the main unit)
Width 1573 × Depth 640 mm
(Main Unit + Finisher-B1)*
Width 1573 × Depth 651 mm
(Main Unit + Finisher-B1 + Booklet Maker)*
* When the extension tray and the bypass tray are fully extended.
Paper Size Maximum: A3 (297 × 420 mm), 11 × 17" (297 × 432 mm)
Minimum : A5 (148 × 210 mm)
Stacker Capacity 100 sheets
Important • When using 80 gsm paper
Dimensions/Weight Width 433 × Depth 469 × Height 238 mm*, 1.4 kg
Machine Footprint
(when the unit is
connected to
the main unit)
Width 973 × Depth 640 mm
(Main Unit + Side Tray)
*
* When the side tray is fully extended
Paper Size Maximum: A3 (297 × 420 mm), 11 × 17" (297 × 432 mm)
Minimum : A5 (148 × 210 mm)
Paper Weight 80 gsm
Paper Capacity 500 sheets
Important • When using 80 gsm paper
Dimensions/Weight Width 540 × Depth 640 × Height 380 mm, 25 kg
Machine Footprint
(when the unit is
connected to
the main unit)
Width 930 × Depth 640 mm
(Main Unit + Two Tray Module)*
* When the bypass tray is fully extended
Paper Size Maximum : A4 (210 × 297 mm), Let (216 × 279 mm)
Minimum : B5 (182 × 257 mm), 7.25 × 10.5" (184 × 267 mm)
Paper Weight 60-215 gsm
Paper Capacity 2000 sheets
Dimensions/Weight Width 540 × Depth 640 × Height 380 mm, 30 kg
Machine Footprint
(when the unit is
connected to
the main unit)
Width 930 × Depth 640 mm
(Main Unit + Tandem Tray Module)*
* When the bypass tray is fully extended
Downloaded From ManualsPrinter.com Manuals