Scanning Procedure
103
Scan
6
The document feeder accepts the following number of sheets.
Important • To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-
pasted documents, curled paper, or carbon-backed paper. If you can flatten the curled
document, you can use the document.
Follow the steps below to place the document on the document feeder.
You can place single or multiple sheet documents.
1 Remove any paper clips or staples from the document before placing it in the
document feeder.
2 Place the document in the center of the
document feeder, with the side to scan (or the
front surface of a 2 Sided document) facing
up.
Note • The document indicator lights up when a
document is placed in the document feeder.
If the indicator is not lit, place the document
again.
3 Align the document guides to each side of the
document.
Document Type (gsm) Number of Sheets
Lightweight (38 to 49 gsm) 110 sheets
Plain (50 to 80 gsm) 110 sheets
Heavyweight (81 to 128 gsm)
(Bypass tray only)
75 sheets
To Next Page
Loading...
Need help?
General
