Printing Reports
133
Machine Status
9
Note • To stop the current printing job, press the
<Stop> button.
When the print job is completed, the status
machine diagram displays as shown in the right
image.
4 When you finish printing, press the <Log In/Out> button to exit the System
Administration mode.
Note • When you exit the System Administration mode, the <Log In/Out> button light is turned off.
Checking the Job Counter
You can check the number of pages printed by the machine under the "Counter" on the
System Settings Report output.
Total Impressions
The total number of pages printed or copied is displayed.
Copied Impressions
The total number of pages copied is displayed.
Printed Impressions
The total number of pages printed is displayed.
Checking Consumables
You can check the statuses of consumables such as toner cartridge and drum cartridge
under the "Consumables" on the System Settings Report output.
Toner Status
Shows the toner cartridge status.
z
[OK]
Replacement is not currently needed.
z
[Reorder]
Replacement is currently not needed, but the cartridge will need to be replaced
soon. Make sure to have a new toner cartridge on hand.
To Next Page
Loading...
Need help?
General
