Advanced Copy Settings
95
Copy
5
Important • Place an ID card in the upright position.
Note • Setting [ID Card Copy] to [On] automatically sets [Reduce/Enlarge] to [100%]. You can
change the zoom ratio manually.
Follow the steps below to use the ID Card Copy feature.
1 Place an ID card face down slightly away from
the top left corner of the document glass, and
then close the document cover.
Placing the ID card too close to the corner of
the document glass may not copy the edge of
the ID card properly
2 Press the <ID Card Copy> button.
The <ID Card Copy> button lights up.
3 Press the <Paper Supply> button to select a
tray.
In the status machine diagram, the tray
indicator lights up on the selected tray, and its
paper size and orientation are displayed on the
paper size display.
4 Press the <Start> button.
When one-side is finished scanning, the
<Start> button lights up blinking.
5 Place the other side of the ID card face down slightly away from the top left corner of
the document glass, and then close the document cover.
6 Press the <Start> button.
To Next Page
Loading...
Need help?
General
