5 Tools
156
Tools
5
displayed when entering the System Administration mode on the control panel or on the
CentreWare Internet Services.
Select [Do Not Display Warning Screen] or [Display Warning Screen].
Note • You can set the SNMP protocol settings on CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the Internet. The communication fee shall be borne by you.
Global IP Address Security Warning
Set whether or not to display the security warning screen when the Global IP Address is used
and [Login Type] is set to [No Login Required]. The warning screen is displayed when
entering the System Administration mode on the control panel or on the CentreWare
Internet Services.
Select [Do Not Display Warning Screen] or [Display Warning Screen].
Paper Tray Settings
Set the items related to the paper and trays, including the type of paper and tray priority.
Custom Paper Name/Color
You can name Custom Paper Types 1 to 5 which you can select in [Paper Type] and Custom
Paper Colors 1 to 5 which you can select in [Paper Color] of [Paper Tray Attributes].
You can use letters, numerals, and symbols of up to 24 characters for each name and color.
For example, you can use a name showing its usage, such as "Color" for colored paper, and
"Covers" for bond paper.
For information about how to enter characters, refer to "Entering Text" (P.37).
Paper Tray Attributes
You can set the size and type of paper loaded in trays.
Note • When envelopes are loaded in HCF B1-S, select [Envelope Feeder] and [Change Settings] on the
[Tray 6] screen, and then set [Paper Size] and [Paper Color]. Set [Paper Type] to [X-HW Plus 2 (257-
300 gsm)].
Important • When you copy or print papers, set [Paper Type] to [X-HW Plus 2 (257-300 gsm)].
For more information, refer to "Changing the Paper Settings" (P.68).
Change Settings
Select this button, if you change the paper size for the tray or the setting of auto paper
selection.
When you load non-standard size paper in a tray, select [Custom Size], and specify the width
and length. When you load standard size paper in a tray, select [Auto Detect].
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
detect a tray, use Tray 5.
Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight for Supported Paper"
(P.40).
Paper Size
When using Trays 1 and 2, you can load both standard size paper and non-standard size
paper. When using Trays 3 and 4, you can load only standard size paper. When you load
non-standard size paper, select [Custom Size], and then set the size in the X (width)
To Next Page
Loading...
Need help?
General
