Fuji Xerox DocuCentre-V C7785 Administrator's Guide

Optional Components
659
Appendix
16
Optional Components
The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Product Name Description
Large Size UI Kit A control panel with the large size color display.
Large Size UI Installation Kit A kit to set the Large Size UI Kit to the machine.
Large Size UI Installation Kit
2
A kit to set the Large Size UI Kit to the machine with HCF B1-S.
HCF2 (2000 sheets) Allows you to load 2,000 sheets of paper (when using 80 gsm
paper) into this tray.
HCF B1-S Allows you to load 2,000 sheets of paper such as A3 and SRA3
(when using 80 gsm paper) into this tray.
Wing Table You can put the related equipment on it or use it as work space.
You can set the table either on the right or on the left of the
document glass depending on the related equipment.
Simply Catch Tray This unit allows to eject paper.
Offset Catch Tray This unit allows to eject paper with an offset.
Catch Tray Fan Kit A tool to use the Simple Catch Tray or the Offset Catch Tray.
C3 Finisher Staples or hole-punches output.
C3 Finisher with Booklet
Maker
Staples or hole-punches output. It also folds output in half or
staples folded output.
Finisher D2-P with Booklet
Maker
Staples or hole-punches output. It also folds output in half or
staples folded output.
Inserter is installed for loading paper to be used as separators and
covers.
D2 Folder Unit This unit allows to fold in z-folded or tri-folded output.
US 2/3 Hole Punch Kit for D2-
Finisher
2/3 hole-punches output sheets.
Note • This kit is available only when the Finisher D2-P with Booklet
Maker is installed.
Punch Unit 2/4H CD1 2/4 hole-punches output sheets.
Note • This kit is available only when the C3 Finisher or C3 Finisher
with Booklet Maker is installed.
Punch Unit US 2/3H CD1 2/3 hole-punches output sheets. The distance between the two
holes of 2/3 Hole Punch Kit is 70 mm. It is different from that of 2/
4 Hole Punch Kit (80 mm).
Note • This kit is available only when the C3 Finisher or C3 Finisher
with Booklet Maker is installed.
Folder Unit CD1 This unit allows to fold in z-folded or tri-folded output.
Note • This unit is available when the C3 Finisher or C3 Finisher with
Booklet Maker is installed.
C3 Finisher Staple Unit 65
Sheets
Staples output sheets. Up to 65 sheets can be stapled depending
on the type of paper.
Note • This unit is available when the C3 Finisher or C3 Finisher with
Booklet Maker is installed.
Adobe PostScript 3 Kit Allows you to use the machine as a PostScript printer. Also enables
printing from Macintosh.

Fuji Xerox DocuCentre-V C7785 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C7785
Category	All in One Printer
Language	English