Loading Paper
53
Paper and Other Media
2
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not pull out the tray.
• To prevent paper jams or misloading, do not add paper on top of any remaining paper in the tray.
Remove any paper remaining in the tray, and then load that paper on top of the newly loaded
paper.
2 Remove any paper loaded in the tray.
3 With the side to be copied or printed on facing
up, load and align the edge of the paper
against the right edge of the tray.
Important • Do not load paper exceeding the maximum
fill line. It may cause paper jams or machine
malfunctions.
4 Push the tray in gently until it stops.
Changing the Paper Size
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not
pull the tray out that the job uses.
2 Remove any paper loaded in the tray.
Make sure to pull out the tray slowly.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body
causing injuries.
Make sure to pull out the tray slowly.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body
causing injuries.
To Next Page
Loading...
Need help?
General
