Cleaning the Machine
93
Maintenance
3
Cleaning the Machine
The following describes how to clean the machine such as the machine exterior, document
cover, document feeder, and document glass.
Cleaning the Exterior
Important • Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the machine
as they might discolor, deform, or crack covers.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying.
1 Wipe the exterior with a firmly wrung soft cloth
moistened with water.
Important • Do not use cleaning agents other than water
or neutral detergent.
Note • If dirt does not come off easily, gently wipe it
with a soft cloth moistened with a small
amount of neutral detergent.
2 Wipe off any excess water with a soft cloth.
Cleaning the Touch Screen
1
Wipe only the LCD area with a soft cloth
moistened with neutral detergent or alcohol.
Important • When you moisten the cloth with neutral
detergent or alcohol, do not allow the excess
liquid to drip down from the cloth. If the cloth
is moistened with the excess liquid, wring the
cloth gently before wiping the LCD area.
• Do not use any volatile liquids on the
machine such as benzene and paint thinner,
or insect repellent as these may discolor,
deform, or crack the machine exterior.
• Cleaning the touch screen with an excessive
force may cause the screen to be damaged.
Wipe the screen gently.
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never use
aerosol cleaners to avoid catching fire and explosion.
When cleaning this product, always switch off and unplug it. Access to a live
machine interior may cause electric shock.
To Next Page
Loading...
Need help?
General
