Customizing the Control Panel
29
Before Using the Machine
1
1 Press the <Log In/Out> button.
2 Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4 Select [System Settings] > [Common Service
Settings] > [Screen/Button Settings].
5 Select [Services Home], and then select
[Change Settings].
6 Select the position where you want to assign a
service.
Note • The layout of the buttons in this screen
corresponds to the layout of those on the
Services Home screen.
To Next Page
Loading...
Need help?
General
