104 5 Control Panel Menus
[EtherTalk]
Set this when using an EtherTalk port.
Note
• [EtherTalk] appears only when the network expansion card (optional), and the PostScript software kit
(optional for the DocuPrint C3055 only) are installed.
[USB]
Set this when using a USB port.
Network / Port
EtherTalk
EtherTalk
Port Status
Setting Item Description
Port Status Sets whether to enable or disable an EtherTalk port at printer start-up.
• [Enable] (default)
•[Disable]
Note
• After changing this setting, reboot the printer.
Network / Port
USB
USB
Port Status
USB
Print Mode
USB
Adobe Protocol
Setting Item Description
Port Status Sets whether to enable or disable a USB port at printer start-up.
• [Enable] (default)
•[Disable]
• After changing this setting, reboot the printer.
Print Mode Sets the method of processing data (print language).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 130.)
• [ESC/P], [PDF], [PS], [PCL]
After receiving data from a computer, the printer processes the data with the
selected print language.
•[HexDump]
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 130.)
Note
• On the DocuPrint C3055, [PS] appears only when the PostScript software kit
(optional) is installed.
To Next Page
Loading...
Need help?
General
