3.8 Printing PDF Files Directly 67
3.8 Printing PDF Files Directly
Some PDF files can be sent directly to the printer without using the print driver. Printing PDF
files directly is much easier and faster when compared to printing them using the print driver.
Important
• If you print a PDF file directly without using the print driver, the date/time, host/user name, document
name on [Job History Report] will be blank. If you print the file with a banner sheet, the date/time, user
name and document name will not be printed on the banner sheet.
PDF Bridge Feature
PDF Bridge is a feature that comes standard with the printer. There are two methods of
printing PDF files using the PDF Bridge feature:
• Using ContentsBridge Utility (software by Fuji Xerox Co., Ltd.)
• Using commands such as lpr and ftp
Note
• When using ContentsBridge Utility, refer to the manual included on the CD-ROM of the driver CD kit.
When using commands such as lpr and ftp, refer to "Printing PDF Files without Using ContentsBridge
Utility" (P. 68).
• To print using the PDF Bridge feature, the printer may require additional memory (optional).
Supported PDF Files
PDF files created on Adobe Acrobat 4, Adobe Acrobat 5 (excluding some of the features
added to PDF1.4), or Adobe Acrobat 6 (excluding some of the features added to PDF1.5)
can be printed on the printer.
Note
• Some PDF files cannot be printed directly depending on how they are created. In such case, open them
and print them using the print driver.
To Next Page
Loading...
Need help?
General
