204 7 Maintenance
Feed Roll Inside the Printer
1. If paper is loaded in the bypass tray,
remove the paper and close the bypass
tray cover.
Important
• When closing the bypass tray cover, be careful not to
get your fingers caught between (the left and right
edge of) the cover and the printer.
2. Push up the lever A and open the front
cover.
3. Identify the location of the feed roll.
4. While rotating the feed roll, wipe the rubber
part with a soft, firmly wrung cloth
moistened with water.
5. Close the front cover.
To Next Page
Loading...
Need help?
General
