112 5 Control Panel Menus
[HTTP-SSL/TLS]
Set this when encrypting HTTP communication using SSL/TLS protocol. [HTTP-SSL/TLS]
appears only when a certificate is registered on the printer.
Note
• For details on encrypting HTTP communication and a certificate required for the printer, refer to "SSL
Data Encryption for HTTP Communication" (P. 177).
• The SSL/TLS communication feature is available only when the network expansion card (optional) is
installed.
• The SSL/TLS communication feature is not supported on the models available in China.
[System Settings]
The [System Settings] menu allows you to set basic printer behaviors.
[Audio Tones]
Sets the audio tones that indicate various printer conditions such as errors.
Network / Port
HTTP - SSL/TLS
HTTP - SSL/TLS
Enable / Disable
Setting Item Description
Enable / Disable Sets whether to encrypt HTTP communication data using the SSL/TLS proto-
col.
• [Disable] (default)
Disables SSL/TLS communication.
•[Enable]
Enables SSL/TLS communication.
Note
• After changing this setting, reboot the printer.
System Settings
Audio Tones
Audio Tones
Control Panel
Audio Tones
Invalid Key
Audio Tones
Machine Ready
Audio Tones
Job Complete
Audio Tones
Fault Tone
Audio Tones
Alert Tone
Audio Tones
Out of Paper
Audio Tones
Low Toner Alert
Audio Tones
Base Tone
To Next Page
Loading...
