72 3 Print
Sending E-mails
Supported E-mail Attachments
Files of the following format can be attached to e-mails:
• PDF files
To Send E-mails
To perform E-mail Print, enter the printer’s address in the “To:” field on your e-mail
application.
Then, enter the following commands in the subject field or in the body message and write
the text or attach the PDF file you want to print.
Note
• The method of sending e-mails varies depending on the application being used. Consult the
documentation for your e-mail application.
• Set the e-mail format to “Text” instead of “HTML”. This feature does not support “HTML” format.
To Specify Commands in the Body Message
The following commands can be specified in the body message.
The subject can be whatever you like.
Example
Follow these guidelines when entering commands on e-mails.
• Commands are not case sensitive.
• If [Password for Print Job] is set, start your e-mail with "#Password".
• Prefix each command with "#". Command that does not start with "#" will be ignored.
• Place only one command per line and separate each command or parameter with a space
or a tab.
• When the same command is entered more than one time in one e-mail, only the first one
will be valid and the rest will be ignored.
Command Parameter Description
#Password Password When [Password for Print Job] is set, make sure to start your
e-mail with this command. When the password is not set,
this command does not need to be entered.
#Print (None) This command prints the text entered after the "#Print".
When a PDF file is attached to the e-mail, this command
also prints the file.
To Next Page
Loading...
Need help?
General
