5.2 Setting the Common Menus 127
[Calibration]
If colors look off after relocating the printer, or after replacing its drum cartridge, print the
Calibration Chart to perform calibration.
For details on color calibration, refer to "7.9 Adjusting Color Density" (P. 192).
[Non Condensing]
Maintenance Mode
Calibration
Calibration
Chart Print
Calibration
Enter Value
Setting Item Description
Chart Print Prints the Calibration Chart when the <Eject/Set> button is pressed.
Enter Value Adjusts the density of cyan (C), magenta (M), yellow (Y), and black (K).
• [-6] to [6] (default: [0])
Maintenance Mode
Non Condensing
Setting Item Description
Non Condensing Sets whether to enable the Non-condensing mode to prevent dew condensa-
tion.
• [Disable] (default)
•[Enable]
Refer to
• "6.8 Non-condensing Mode" (P. 158)
To Next Page
Loading...
Need help?
General
