152 6 Troubleshooting
Wrong paper size
Reload Tray N
(N: tray 1 - 4)
The job requested the tray N, but the paper size of the tray does not match the paper
size specified by the job.
Change the paper size setting on the control panel.
Refer to
• "Loading Paper in the Trays 1 - 4" (P. 83)
Wrong paper size
Reload Bypass
The job requested the bypass tray, but the paper size of the tray does not match the
paper size of the job.
Change the paper size setting on the control panel.
Refer to
• "[Printer Settings]" (P. 119)
Wrong password
Press SET
The password of the PDF file and that set on the printer do not match.
Cancel the job by pressing the <Eject/Set> button on the control panel.
Set the correct password on the control panel and try printing again.
Refer to
• "[PDF]" (P. 94)
Yellow Toner
ID Error
Press SET
Replace Toner
The toner cartridge is not appropriate for the printer.
Use an appropriate toner cartridge and install it correctly in the printer.
Refer to
• "Replacing the Toner Cartridges" (P. 162)
• "Types of Consumables" (P. 160)
Message Symptom/Cause/Remedy
To Next Page
Loading...
Need help?
General
