7.9 Adjusting Color Density 195
4. Enter the margin in the appropriate [Margin] box.
5. Obtain the margin for the other two density areas.
6. Repeat Steps 1 to 5 to obtain the density margins for the rest of the colors.
7. After entering the density margins of all colors, enter the values in the appropriate
[Margin] boxes under [Computation Table]. (Example: cyan)
8. Determine the values based on the equations and enter the values in [Adjustment
Value].
Note
• The values entered at the last calibration are displayed under [Current Value].
To Next Page
Loading...
