Fuji Xerox DocuWide 6035 User Manual

11System Settings
248
System Settings
11
[System Settings]>[System Settings]>[Printer Settings]
Detailed Settings
Allows you to make additional settings related to the printer.
Currently, there is no item to set in this category.
Long Edge Det. -
ISO A0
Select the allowance range for the long edge size
of the input data for each standard size.
The default values do not need to be changed
under normal conditions.
ISO A1
Long Edge Det. -
ISO A1
ISO A2
Long Edge Det. -
ISO A2
ISO A3
Long Edge Det. -
ISO A3
ISO A4
Long Edge Det. -
ISO A4
ISO A4
Dither Pattern Select the combination of dither pattern and den-
sity.
Select from the six combinations ([Pattern 1 (Dark/
Normal/Light)] [Pattern 2 (Dark/Normal/Light)]).
Pattern 1 (Nor-
mal)
LPD Log Display For the LPD transfer log, select whether to display
the IP address of the server that sent the data, or
the host name of the machine to which the data
was sent.
Select [IP Address] or [Host Name].
IP Address
Draw Solid Thin Line Set whether to draw a line thinner than the speci-
fied width as a black solid line without dithering.
Select [Off] or [On]. When selecting [On], specify
the threshold within the range of 1 to 511(pixel).
Off
Items Notes Factory
Default

Fuji Xerox DocuWide 6035 Specifications

General

Brand	Fuji Xerox
Model	DocuWide 6035
Category	All in One Printer
Language	English