Fuji Xerox DocuWide 6035 User Manual

2Copy
54
Copy
2
9 Press the <Start> button.
The machine starts outputting copies.
Registering Distribution Patterns
When selecting [Program] for copying, register distribution patterns beforehand.
1 Select the <Menu> button.
2 Select [Setup Menu].
3 Select [Program Distribution].
4 Select an unregistered program number and
press [Create/Edit].
Note • [Press [ ] to display the previous screen and
press [ ] to display the next screen.
• To specify the program number directly, enter
a 3-digit number via the numeric keypad under
[Go to].
5 Select a virtual distribution destination, and then
enter the number of copies via the numeric key-
pad.
Note • Maximum number of documents: 800 sheets
• Maximum number of programs: 300 patterns
• Maximum number of virtual distribution desti-
nations: 40 bins
• Maximum copy quantity for a program: 99 cop-
ies
Job Status
Machine Status
Log In/Out
Clear All
Interrupt
Start
Stop
Transmitting
Copy Scan Menu
Job in memory
Copy from
Memory
Power Saver
<Start> button
Menu
Copy
Scan
Stored
Programming
Setup Menu
Language
Please select the required service.
Close
Setup Menu
Stored
Copy Program
Stored
Scan Program
Stored Multi-
Job Program
Mailbox
Program
Distribution
002. (Not Reg.)
003. (Not Reg.)
004. (Not Reg.)
005. (Not Reg.)
006. (Not Reg.)
Create
/Edit
Close
Program
Distribution
Delete
Page 1 of 30
Go to
(001-300)
007. (Not Reg.)
008. (Not Reg.)
009. (Not Reg.)
010. (Not Reg.)
001. (Not Reg.)
Cancel
Close
Program 001
Copies
Copies
Copies
Copies
Copies
Copies Copies Copies
Copies
Copies
Page
1/4

Fuji Xerox DocuWide 6035 Specifications

General

Brand	Fuji Xerox
Model	DocuWide 6035
Category	All in One Printer
Language	English