Fuji Xerox DocuWide 6035 User Manual

12Machine Status
260
Machine Status
12
Fuser Settings
The temperature and the idle of the fuser can be
set.
A Fuji Xerox customer engineer will set them.
 Fuser Temp Settings
Select [Auto Select] or [Manual Select].
[Manual Select] allows you to set the tempera-
ture of the fuser from Low to High in seven steps.
Note • [Manual Select] functions for media loaded on
the Manual Feed Tray.
When the [Maintain Settings] checkbox is
selected, the settings of the temperature are
saved even after the power is turned on or off.
When not selected, [Auto Select] is enabled after the power is turned on/off.
 Fuser Idle
The fuser will be idled before operation for better
fusing of the toner when printing on thick media
or vellum.
Press [Start] to rotate the Fuser Roller for 30
seconds.
Fuser Settings
Close
Items Current Settings
1. Fuser Temp. Settings
2. Fuser Idle
Auto Select
---
Fuser Temp. Settings
Cancel Save
Auto
Select
Manual
Select
Fuser Temperature
Low High
Maintain Settings
Fuser Idle
Pressing Start will rotate the Fuser Roller
for 30 seconds.
Start
Close

Fuji Xerox DocuWide 6035 Specifications

General

Brand	Fuji Xerox
Model	DocuWide 6035
Category	All in One Printer
Language	English