1 Before Using the Machine
28
Before Using the Machine
1
îš„ Simple Folder (Optional) When connected
See • For details about Simple Folder: Optional accessory guides
24 Power Breaker
(Main Power Switch)
Used to switch the main power to the machine on/off.
25 Interface Cover Contains the LAN port and service port. Do not use the service port. It is
intended to be used only by our customer engineers.
Important • Turn off the power of the machine, and then connect the LAN
cable.
26 Toner Supply Port Toner is replenished in the machine through this port.
27 IC Card Reader Reads and authenticates the IC card. (Optional)
28 Cutter Button Trims the lead edge of roll media.
29 Cutter Cover Covers the cutter to trim media. Do not open this cover.
30 Roll1, Roll2 Load roll media here.
No.
Component Function
To Next Page
Loading...
Need help?
General
