13
Problem Possible causes and solutions
The print is
uneven.
• Do not shake, bend, fold or hold the print
immediately after it is printed.
• Do not obstruct the film ejection slot.
I cannot reprint
images.
The stored image is deleted when the
printer is turned off.
I cannot change
the App mode
even when
operating the
INSTAX MINI LINK
App.
Setting [Camera operation settings] on the
INSTAX MINI LINK App to [ON] enables the
Smartphone App linked function to work.
Check the direction the printer is facing.
The function that
is used by tilting
the printer does
not work.
Confirm that [Camera operation settings] on
the INSTAX MINI LINK App is set to [ON].
IMPORTANT SAFETY NOTICE
This product has been designed with safety in mind, and to
provide safe operation when handled correctly and in accordance
with the instructions in this User’s Guide. It is important that both
the product and the INSTAX MINI instant film pack are handled
properly and used only to print photos as instructed in this User’s
Guide and in the INSTAX MINI instant film pack instructions. For
your ease and safety, strictly follow the instructions in this User’s
Guide. Keep this User’s Guide in a safe, convenient place for easy
future reference as needed.
WARNING
This symbol indicates danger, which could result in product
damage, injury or death. Follow the instructions indicated to avoid
damage to the printer or injury.
WARNING
If one of the following cases occur, immediately unplug the
Micro USB cable, turn the printer off and refrain from any
further use of the printer:
• The printer becomes hot, emits smoke, has a burnt smell, or
otherwise seems abnormal.
• The printer is dropped into water, or foreign objects like water,
sand, dirt or metal get inside the printer.
The printer has a built-in battery� Do not subject it to heat,
expose it to an open flame, drop it, or otherwise apply impact
to it� Doing so may cause the printer to explode, resulting in
injury�
WARNING
Never attempt to take this product apart� You may be injured�
All repairs should be handled solely by Fujifilm� Injury may
result from attempts to self-assess or repair this printer�
If this product is dropped or damaged so that the inside is
showing, do not touch it� Contact Fujifilm�
Do not touch any parts which are inside the film door� You
may be injured�
Never get this product wet or handle it with wet hands� Doing
so may result in electric shock and injury�
Promptly unplug the Micro USB cable once battery is fully
charged� Printer will not over-charge�
Keep out of the reach of small children� This product could
cause injury in the hands of a child�
Do not cover or wrap the printer or USB AC power adapter in a
cloth or blanket, or otherwise place the printer in the sun or
an environment where heat may build up� This could distort
the casing or cause a fire�
To Next Page
Loading...
