5
Loading/Unloading the INSTAX MINI™ Instant
Film Pack
CAUTION
Do not open the film door until you have used up the film;
otherwise, the rest of the film will become exposed and turn
white� The film can no longer be used�
• When you load the film pack, never press the two rectangular
holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may
damage the printer.
Use FUJIFILM INSTAX MINI Instant Print Film only. The
INSTAX SQUARE® or INSTAX WIDE™ Instant Film Packs cannot be
used.
Notes on the film pack
• Each FUJIFILM INSTAX MINI Instant Film Pack contains one
black film protective cover and 10 film sheets.
• Do not remove the film pack from its inner bag before
loading it into the printer.
• The film cover is ejected automatically when the film door is
closed.
For details, refer to the instructions and warnings on the
package of FUJIFILM INSTAX MINI Instant Print Film.
Loading the INSTAX MINI Instant Film Pack
1
Slide and hold the film door lock and open the film
door�
2
1
2
Insert an INSTAX MINI instant film pack by aligning
the yellow marks�
2
1
3
Close the film door�
4
Remove the black film cover that is ejected from the
printer�
The INSTAX MINI LINK 2 Smartphone Printer is designed for use
with INSTAX MINI instant print film only.
Unloading a Used INSTAX MINI Instant Film Pack
1
Slide the film door lock and open the film door�
2
1
2
Grasp the rectangular holes on the film pack, then
pull film pack out from the printer� Properly dispose
of used film pack�
2
1
To Next Page
Loading...
