5.1 Printing
5–4
Here are the types of lamp.
*1. The divided order is an interrupted order by the output for priority order.
!
!!
! Lighting pattern of the lamp
This section explains the lighting pattern of the lamp with some examples.
Symbols used in the following table
IMPORTANT
• If a priority order is printed, the prints may be output into the separate tray. Confirm that all prints are output
after printing is completed.
NOTE
• Confirm the CVP imprinting to identify which trays receive the same order.
Status
Lighting in orange The output for the priority order is completed.
Blinking in orange The priority order is being output.
Lighting in blue The output for the divided order
*1
is completed.
Off Orders other than above such as normal orders, not priority orders or divided orders
are being output or completed.
Pattern Explanation
If a tray is used for a
priority order
The lighting pattern of the lamp, see
☞Lighting pattern of the lamp.
G088941
Blinking
Lighting in orange
Lighting in blue
G088652
The output for the priority order is
completed.
The normal order is being output.
The priority order is being output.
To Next Page