FujiFilm LP7500 - Installing a Paper Magazine in the System in Which the Quad Magazine Unit Is Installed

5.2 Installing and removing paper magazines
5–15
5. Printing
5.2.3 Installing a paper magazine in the system in which the quad
magazine unit is installed
In this section, attaching the paper magazine A is explained as an example.
The procedure is the same for paper magazine A2.
IMPORTANT
• The magazine handle deterioration will not occur within the normal use of it. However, if there is a fray in the
handle or the metal parts are deformed due to some reasons such as dropping the magazine, there is a
possibility that the magazine handle will break. Consult your technical representative to replace the magazine
handle.
• The outlets of the paper magazines are designed to close when the printer doors are opened. Opening any
other door or cover without opening the printer doors causes the paper ends to be exposed in the magazines.
Be sure to open all the printer doors first.
• Paper magazine A or magazine A2 can be changed by opening the printer door 3 while printing in paper
magazine B or magazine C. However, applying vibration to the system may adversely affect printing. To
prevent damage to the system, avoid subjecting it to shock or vibration.
9 Close printer door 3. Close printer doors 1 and 2.
10 Close printer doors 1 and 2. Close printer door 3.
This is only for systems with the optional triple magazine.
Step Paper magazine A
(For the triple magazine unit)
Paper magazine B Paper magazine C
Printer door 3
Printer door 1
Printer door 2
Printer door 1
Printer door 2
Printer door 3