Scrolling through images
You can scroll using either the Scroll tool or, when a tool other than Scroll is selected, you can scroll using
mouse and keyboard or touch gestures.
To scroll using the Scroll tool
1.
Click the Scroll ( ) tool.
2. Click the main view, then drag up or down.
To scroll using mouse and keyboard
Do one of the following:
Scroll up and down with the mouse wheel.
Press the Right arrow key to advance to the next slice and press the Left arrow key to go back
to the previous slice.
To scroll using touch gestures
Drag up/down.
Alternately, to scroll through single images:
Tap near the top or bottom of the view
To scroll through images using the image slider bar
Click the slider and drag left or right.
You can also “jump” to an image by clicking directly on the image slider bar.
If the series contains GSPS/CSPS objects, the image slider bar will display vertical ticks
indicating the location of the images that contain these objects. You can use these ticks to
jump to the images.
You can also scroll through only the images containing GSPS/CSPS objects by using the
next and previous buttons to the right of the bar.
Using cine
Cine mode automatically scrolls through images at the current window/level and zoom settings. Motion
studies, such as cardiac ultrasound or X-ray angiography, will automatically open in cine mode at the frame
rate specified in the DICOM header.
Viewer interactions such as pan, zoom, window/level etc. are disabled while cine mode is
activated.
To activate cine mode
Select Cine from the view menu. The image slider bar will fill with color indicating data
buffering progress.
Synapse® Mobility User Guide for HTML5 Viewer
Confidential and Proprietary
DOC-0046692-A
37
To Next Page
Loading...
