FujiFilm X-A2 - Saving Pictures to a Computer

96
Saving Pictures to a Computer
Saving Pictures to a Computer
Follow the steps below to save pictures to a computer over a wireless network. Before proceeding,
install the free FUJIFILM PC AutoSave application to the destination computer and adjust settings as
desired. Be sure the camera battery is fully charged.
R Visit the following website for information on downloading FUJIFILM PC AutoSave and adjusting settings:
http://app.fujifilm-dsc.com/pc/.
1
During playback, press MENU/OK to display the playback menu.
2
Select s PC AUTO SAVE.
R A s PC AUTO SAVE option is also available in the r WIRELESS TRANSFER menu,
which can be displayed by pressing the Fn (Wi-Fi) button.
3
The options shown at right will be displayed; select a destination.
R The destination can also be selected using s PC AUTO SAVE SETTING.
PC- 01
PC- 02
PC- 03
PC- 04
PC- 05
MY-PC
SELECT DESTINATION PC
4
Follow the on-screen instructions.
R Do not turn the camera o or remove the camera battery or memory card while transfer is in progress.
R The camera will turn o automatically shortly after upload is completed.