FujiFilm X-E2S - Flash Set-Up; W Movie Set-Up

96
Using the Menus: Shooting Mode
p
p
FLASH SET-UP
FLASH SET-UP
Adjust  ash settings.
Option
Option
Description
Description
FLASH MODE
FLASH MODE
Choose a  ash mode (
P 36).
FLASH COMPENSATION
FLASH COMPENSATION
Adjust  ash brightness. Choose from values between +2 EV and –2 EV. Note that the desired results may
not be achieved depending on shooting conditions and the distance to the subject.
RED EYE REMOVAL
RED EYE REMOVAL
Choose ON to remove red-eye e ects caused by the  ash.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
W
W
MOVIE SET-UP
MOVIE SET-UP
Adjust movie settings (P 38).
Option
Option
Description
Description
MOVIE MODE
MOVIE MODE
Select a frame size and rate for movie recording.
• i 1920×1080 60 fps: Full HD (60 fps)
• i 1920×1080 50 fps: Full HD (50 fps)
• i 1920×1080 30 fps: Full HD (30 fps)
• i 1920×1080 25 fps: Full HD (25 fps)
• i 1920×1080 24 fps: Full HD (24 fps)
• h 1280×720 60 fps: HD (60 fps)
• h 1280×720 50 fps: HD (50 fps)
• h 1280×720 30 fps: HD (30 fps)
• h 1280×720 25 fps: HD (25 fps)
• h 1280×720 24 fps: HD (24 fps)
MOVIE ISO
MOVIE ISO
Choose the sensitivity for movie recording from AUTO or from settings between ISO 400 and 6400.
R This setting has no e ect on photographs.
MIC LEVEL ADJUSTMENT
MIC LEVEL ADJUSTMENT Adjust the microphone recording level.
MIC/REMOTE RELEASE
MIC/REMOTE RELEASE
Specify whether the device connected to the microphone/remote release connector is a microphone or
a remote release (P 39, 54).