75
More on Photography and Playback
Sensitivity
“Sensitivity” refers to the camera’s sensitivity to light. Choose from values between 200 and 6400, or se-
lect low-gain (L (100)) or high-gain (H (12800), H (25600), or H (51200)) options for special situations.
Higher values can be used to reduce blur when lighting is poor, while lower values allow slower shut-
ter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken
at high sensitivities, particularly at higher gains, while choosing the low-gain option reduces dynamic
range. Values of from ISO 200 to ISO 6400 are recommended in most situations. If AUTO1, AUTO2, or
AUTO3 is selected, the camera will adjust sensitivity automatically in response to shooting conditions.
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight N ISO and press MENU/OK.
2
Press the selector up or down to highlight the desired option and press MENU/OK to select.
R Sensitivity is not reset when the camera is turned o .
R The low-gain option reset to ISO 200 and the high-gain options to ISO 6400 when RAW, FINE+RAW, or
NORMAL+RAW is selected for image quality (P 93). For more information on the settings available with low-
and high-gain options, see page 151.
To Next Page
Loading...
