Security functions
52 10600690747, edition 1
Password protection of operating system
i
With the supervisor password or the user password, you have assigned in the BIOS Setup
Utility (see "Setting supervisor and user password" section), you can also prevent booting
of the operating system.
Activating system protection
► Enter the BIOS Setup Utility and go to the Security menu.
► Select the Password on Boot option and press the Enter key.
► Select Enabled and press the Enter key.
► Select the Save Changes and Exit option under Exit.
Your notebook will now restart and you are asked to enter your password (the supervisor password).
Deactivating system protection
► Enter the BIOS Setup Utility and go to the Security menu.
► Select the Password on Boot option and press the Enter key.
► Select Disabled and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes and Exit option under Exit.
The notebook reboots and there is no longer any password protection for the system.
To Next Page
Loading...
Need help?
General
