Why my Fujitsu Laptop cannot be started?
If your Fujitsu Laptop won't start, it could be due to several reasons. First, ensure the battery is correctly installed in its compartment. If that's not the issue, the battery might be dead; try charging it, inserting a charged battery, or connecting the mains adapter. Lastly, verify that the power adapter is correctly connected to the laptop.
What to do if my Fujitsu Desktop monitor remains blank?
If the Fujitsu Desktop monitor remains blank, first, ensure the monitor is switched on. If it is, power saving might be activated; press any key or deactivate the screen saver. Also, check the brightness control. If the issue persists, switch off both the monitor and the desktop, and verify that the power and monitor cables are properly connected to both the devices and grounded mains outlets.
How to fix blank LCD screen on Fujitsu Laptop?
If your Fujitsu Laptop's LCD screen remains blank, make sure the monitor is not switched off by pressing a key or touching the touchpad. If you have an external monitor or television connected, try pressing the key combination Fn + F10 to switch the screen output.
What to do if Fujitsu Laptop keyboard types numerals instead of characters?
If your Fujitsu Laptop is displaying numerals instead of characters when typing, the virtual numeric keypad is likely activated. To resolve this, press the key combination Fn + Num.
How to troubleshoot a Fujitsu AMILO with no power indicator?
If the power indicator remains off after switching on your Fujitsu Desktop, ensure the power cable is properly plugged into both the device and a grounded mains outlet. Also, check for a faulty mains voltage supply. If the issue persists, the internal power supply might be overloaded. In that case, pull out the power plug, wait a moment, then plug it back in and switch the device on again.
What to do if Fujitsu AMILO Desktop cannot be switched off?
If your Fujitsu Desktop cannot be switched off with the ON/OFF switch, first ensure that the device has been switched on with the ON/OFF switch. If the issue persists, the system may have crashed. Keep the on/off switch pressed for at least 4 seconds until the machine switches off. Be aware that this can lead to data loss as the operating system will not shut down in an orderly way.
Why is my Fujitsu Desktop wireless keyboard/mouse not working?
If the wireless keyboard or mouse is not recognized or fails to work with your Fujitsu Desktop, make sure that the mouse is switched on and the batteries in the keyboard or mouse have been inserted correctly and are not flat. Try re-establishing the connection between the receiver and the keyboard or mouse. Also, unplug the receiver from the computer and plug it back in. Ensure the receiver is at least 20 cm away from other electrical devices. Check whether the USB port of your computer is correctly configured. If the desk top is glass or is otherwise highly reflective, this can confuse the sensor in the mouse. In such cases, use a conventional mouse pad or change to a more suitable workplace.
What to do if there is no mouse pointer on Fujitsu Desktop?
If no mouse pointer is displayed on the screen of your Fujitsu Desktop, shut down the operating system properly and switch the device off. Check that the mouse cable is properly connected to the system unit. If you use an adapter or extension lead with the mouse cable, check the connections. Make sure that only one mouse is connected. Then, switch the device on.
How to correct the time/date on a Fujitsu AMILO Desktop?
If the time and/or date is not correct on your Fujitsu Desktop, set the correct time and date within the operating system you are using or in the BIOS Setup. If the time and date are repeatedly wrong when you switch on your device, replace the lithium battery.
What to do if external monitor remains blank when connected to Fujitsu Laptop?
If the external monitor connected to your Fujitsu Laptop remains blank, several factors could be at play. First, check that the monitor is switched on. If it is, ensure that power saving mode hasn't been activated by pressing any key. Also, verify the brightness isn't set too low and that the screen output is correctly set (try pressing Fn + F10 to switch screen output). Finally, check the power and data cables are properly connected to both the monitor and the laptop; switch off both devices before checking the connections, then switch them back on.
General| RAM | Up to 4GB |
|---|---|
| Operating System | Windows Vista |
| Connectivity | Ethernet |
| Ports | USB 2.0, VGA |
| Graphics | Integrated Intel Graphics |
| Optical Drive | DVD-ROM, DVD-RW |
Crucial safety guidelines for operating the notebook.
Procedure for the initial setup of the notebook with Windows.
How to properly power the notebook on and off.
Setting up supervisor and user passwords in the BIOS.
Enabling system protection to prevent unauthorized startup.
Procedure for safely removing and installing the notebook battery.
Guide for safely replacing the notebook's hard disk drive.
Using diagnostics and restoring software/OS.
Troubleshooting common problems like startup failures or incorrect time.
To Next Page
