Working with the notebook
Inserting or removing a data carrier (drive tray)
2
1
► Push the inser t/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the da ta carrier in the drive tray with
the printed side facing upwards.
or
► If t here is already a data carrier in
the drive then take it out fi rst.
► Push in the drive tray until you feel
it lock into place.
Manual removal of data carriers (emergency removal)
CD/DVDRemovingbyhand,CD/DVDEmergencyrem oval,CD/DVD
In the event of a power failure or damage to the drive it may be necessary
to manua lly remove the CD /DVD.
1
2
► Switch your notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
44 A26391-K90-Z200-1-7619, edition 1
To Next Page
Loading...
Need help?
General
