To Next Page

To Previous Page

Switching the server on and off Switching the SE700 / SE500 on and off

U41858-J-Z126-2-76 79

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

19. April 2017 Stand 15:41.41 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.k08

4. Switch on the optional Server Units x86

Before the Server Unit is switched on, the status indicator lights up orange.

Ê Switch on the Server Unit by pressing the On/Off switch.

The power-on indicator lights up green. The Server Unit switches on, conducts a

system test and starts X2000.

If automatic IPL is configured for BS2000, the BS2000 system (Native or as a VM2000

monitor system) is also started with the configured settings.

If automatic startup is configured for XenVMs, these systems are also started.

i The controls and indicators of the Server Unit are described in the "Server Unit

x86" Operating Manual [3].

Further Server Units x86 are switched on in the same way.

5. Switch on the optional Application Units

Before an Application Unit is switched on, the status indicator lights up orange (POWER

STAND-BY).

Ê As the administrator or AU administrator, switch on the Application Unit using the

SE Manager (menu Hardware → Units[ → <se server>] (SE<model>), Units tab, Switch on

symbol), see the “Operation and Administration” manual [5].

Alternatively, switch on the Application Unit by pressing the On/Off switch.

The power-on indicator lights up green. The Application Unit switches on, conducts a

system test and starts the operating system.

i The controls, indicators and further on/off options for the AU are described in the

"Additive Components" Operating Manual [4].

Further Application Units are switched on in the same way.

Fujitsu BS2000 Basic Operating Manual

Other manuals for Fujitsu BS2000