60
How to operate the tuner
Setting a station name
Press the [FUNC] button while in the tuner mode.
1
Turn the [SEL] button to select Station Name.
2
Press the [SEL] button.
3
Press the [SEEK ] button to select the character type.
4
Pressing the button will switch types from [ABC] (alphabet
characters) to [123] (numeric characters) and then [!&?]
(symbols).
The station name setting mode is activated.
The selected item will be highlighted.
Press either [SEL] or [FAST ] button to select the
position in which to enter the character.
5
The character will be inserted where the cursor is flashing:
[SEL] button: Moves the cursor to the right.
[FAST ] button: Advances the cursor to the left.
Station name settings can be changed.
[SEEK ] button
[SEL]
button
[FAST ] button
[RTN] button[FUNC] button
To Next Page
Loading...