FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Copyright 2019 FUJITSU LIMITED P3AM-8012-14ENZ0
6
Preface
Fujitsu would like to thank you for purchasing our power synchronized unit for the ETERNUS AF/DX storage sys-
tems.
The power synchronized unit is a device that synchronizes power operations of the ETERNUS AF/DX storage
systems with servers.
Please carefully review the information outlined in this manual.
This manual introduces the user to the power synchronized unit, and explains the regular checks and mainte-
nance that are required.
This manual is designed for use with the following ETERNUS AF/DX storage systems:
• ETERNUS AF150 S3/AF250 S3 All-Flash Arrays
• ETERNUS AF650 S3 All-Flash Arrays
• ETERNUS AF250 S2 All-Flash Arrays
• ETERNUS AF650 S2 All-Flash Arrays
• ETERNUS AF250 All-Flash Arrays
• ETERNUS AF650 All-Flash Arrays
• ETERNUS DX200F All-Flash Arrays
• ETERNUS DX60 S5/DX100 S5/DX200 S5 Hybrid Storage Systems
• ETERNUS DX500 S5/DX600 S5 Hybrid Storage Systems
• ETERNUS DX900 S5 Hybrid Storage Systems
• ETERNUS DX60 S4/DX100 S4/DX200 S4 Hybrid Storage Systems
• ETERNUS DX500 S4/DX600 S4 Hybrid Storage Systems
• ETERNUS DX8900 S4 Hybrid Storage Systems
• ETERNUS DX60 S3/DX100 S3/DX200 S3 Hybrid Storage Systems
• ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
• ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems
• ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems
Fourteenth Edition
October 2019
Applicable Environment
The power synchronized unit was designed and manufactured with user safety for general office environments in
mind. When using the power synchronized unit, follow the handling instructions, placement and cautionary
notes listed in this manual. If used beyond the limits described, the users may be at risk of personal injury and/or
material damage.
To Next Page
Loading...
Need help?
General