Safety Precautions
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
15
■ Handling cables
• Do not damage or modify the cables such as heating, forced bending,
twisting, pulling, or placing heavy objects on them. Doing so may damage the
cables and cause the power synchronized unit to malfunction.
• Do not forcibly bend or fold the cable. Doing so may damage the cable and
cause the power synchronized unit to malfunction.
• Firmly insert cable connectors into inlets, outlets, or sockets. Failure to do so
may cause the power synchronized unit to malfunction.
• When inserting or removing the cable, only hold the connector. Do not hold
the cable. Doing so may damage the cable and cause the power synchronized
unit to malfunction.
• Remove any dirt, dust, oil, grease, etc on cable connectors. Failure to do so
may cause the power synchronized unit to malfunction.
90
Do not bend
more than 90 degrees
Do not fold
To Next Page
Loading...
