3. Notes and Cautions When Using ONTAP
Caution for the ONTAP Command
Notes and Cautions When Using This Product
37
Caution for the ONTAP Command
About the Parameters of the storage failover Command
Although operating the "auto-giveback" and "auto-giveback-after-panic" parameters of the "stor-
age failover" command with "false" is recommended, if these parameters are set to "true" due to the
customer’s requirements, these parameters are set to "false" after the ONTAP upgrade. Therefore, if
these parameters have been set to "true", set these parameters to "true" again after the ONTAP
upgrade.
Cautions When Applying ONTAP One to a Storage System
That Does Not Support the S3 SnapMirror License
If the ONTAP version is 9.11.1 or earlier and NLF is applied using ONTAP System Manager, an error
appears. The following error appears if NLF (ONTAP One) is applied to a storage system that does
not support the S3 SnapMirror license and the ONTAP version is 9.11.1 or earlier.
To use S3 SnapMirror, upgrade ONTAP to 9.12.1 or later and try again.
To Next Page
Loading...
Need help?
General