Fujitsu ETERNUS AX Series User Manual

4. Notes and Cautions for Optional Software
Cautions about ONTAP tools for VMware vSphere (OTV)
Notes and Cautions When Using This Product
44
When Upgrading to OTV 9.13P1
• The OTV appliance is started in the GRUB Rescue mode
The following error may occur when upgrading to OTV 9.13P1 and the OTV appliance may start
up in the GRUB Rescue mode.
Make sure to power off the OTV appliance and create a VM snapshot before upgrading to OTV
9.13P1. If the upgrade process fails, restore the VM from the VM snapshot and then try the OTV
upgrade again.
If this phenomenon occurs while upgrading to OTV9.13P1 without creating a VM snapshot, con-
tact the Fujitsu Support.
• The platform information in the storage capability profile becomes empty after the upgrade
After upgrading to OTV9.13P1, the platform information in the storage capability profile that is
created by the user may become empty. If this phenomenon occurs, delete the storage capabil-
ity profile that is created by the user and then create it again.

Fujitsu ETERNUS AX Series Specifications

General

Brand	Fujitsu
Model	ETERNUS AX Series
Category	Storage
Language	English