Fujitsu ETERNUS DX8700 S3 - Page 1012

Appendix B Factory Default List
B.6 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1012
■ Modify REC Multiplicity
■ Set REC Bandwidth Limit
■ ODX
*1: The ODX function is disabled by default and only the [Enable ODX] function is available.
Screen Setting item Default value
Remote Box ID List Priority Level
• When the local storage system and the remote
storage system are connected by direct
connection
Automatic
• When the local storage system and the remote
storage system are connected by remote
connection
"-" (hyphen)
Specification Mode
• When the local storage system and the remote
storage system are connected by remote
connection
Automatic
• When the local storage system and the remote
storage system are connected by direct
connection
"-" (hyphen)
Remote Box ID List Multiplicity
• When the local storage system and the remote
storage system are connected by remote con-
nection and "Manual" is selected for the
specification mode
1
• When the local storage system and the remote
storage system are connected by remote con-
nection and "Automatic" is selected for the
specification mode
"-" (hyphen)
• When the local storage system and the remote
storage system are connected by direct
connection
"-" (hyphen)
Advanced Setting Copy Schedule Mode Session Balancing
Screen Setting item Default value
Bandwidth Limit Settings Setting Mode Set the same Bandwidth Limit for all paths
Bandwidth Limit 0 (Mbit/s): Unlimited
Screen Setting item Default value
Enable ODX Operation mode Disable (*1)
Disable ODX