Fujitsu ETERNUS DX8700 S3 - Page 185

Chapter 1 System Management
1.12 Storage Migration Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
185
4 Check the path group, and click the [Start] button.
 A confirmation screen appears.
5 Click the [OK] button.
 Storage Migration starts.
6 Click the [Done] button to return to the [Storage Migration] screen.
End of procedure
• Click the [Path Group] link to display the [Path Group Detail Information] screen. Refer to "Path
Group Detail Information" in "ETERNUS Web GUI User’s Guide (Operation)" for display items.
• If a CE number is not specified for the migration path in the ETERNUS DX8700 S3/DX8900 S3,
"CE#0" is assumed as specified. To change the CE number, cancel the process, edit the Storage
Migration setting file, and then restart this function.
• Refer to the [Storage Migration] screen for progress status of Storage Migration.
For display items, refer to "Storage Migration" in "ETERNUS Web GUI User’s Guide (Operation)".
• Click the [Path Group] link to display the "Path Group Detail Information".