EasyManua.ls Logo

Fujitsu ETERNUS DX8700 S3 - Page 704

Fujitsu ETERNUS DX8700 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
704
Slave IP Address
Subnet Mask
Gateway
DNS
Primary DNS
Secondary DNS
Description Input the IP address for the Slave CM of the ETERNUS DX.
The IP address of the Slave CM is used when an error occurs in the Master CM.
This item is not displayed for the 1CM model.
Input condition/
Display contents
Numeric characters
0 - 255
Description Input the subnet mask of the ETERNUS DX.
Input condition/
Display contents
Numeric characters
255.0.0.0 - 255.255.255.252
Description Input the IP address of the gateway.
Input condition/
Display contents
Numeric characters
0 - 255
This item is not displayed when an FST port is selected.
Description Input the IP address of the Primary DNS server that is used for the management LAN.
Input condition/
Display contents
Numeric characters
0 - 255
This item is not displayed when an FST port is selected.
Description Input the IP address of the Secondary DNS server that is used for the management LAN.
Input condition/
Display contents
Numeric characters
0 - 255
This item is not displayed when an FST port is selected.
The Secondary DNS server must be specified after the Primary DNS server.

Table of Contents

Other manuals for Fujitsu ETERNUS DX8700 S3

Related product manuals